Configuring standard displays in BREIN |
  
|
Configuring standard displays in BREIN |
|
The standard pages of BREIN showing results are configured in the files
•results_history.ini
•profiles.ini
•spectra.ini
Although the structure of the ini-files is described below, it is recommended to use the graphical user interface shown above to control the appearance of the various pages of BREIN. It is much easier, and the probability of faulty settings is much lower!
Results_history.ini
This file controls the appearance of the time development of parameters on the page 'History'. When you make changes to this file, be careful and do not enter empty lines which may screw up the file structure. The content of the file for the demo product is used here in order to explain the different sections of the file. File content is shown in blue, explanations in red.
There are four different groups of parameters which are shown on 4 subpages of the Insitu page:
Number of groups
4
Every group has a name and three RGB parameters for the background color of the subpage (the colored background is not implemented yet, though):
Name group 1
Colors I
Background color group 1 R
200
Background color group 1 G
200
Background color group 1 B
200
This group displays 9 channels, i.e. It shows results of 9 parameters:
Number of channels group 1
9
Groups are separated by a dashed line
-------------------
BE 1
Specify the name of the bright eye which has determined this parameter
BE1
Parameter 1
Specify the name of the parameter
BE1 L*
Target value 1
Specify the target value for this parameter. It is recommended to use the term Get original here which means that the target value and the tolerated minimum and maximum value for this parameter are taken from the definition in the corresponding deposition device.
Get original
Min warning value 1
If you have used Get original above, this minimum value is ignored
10
Max warning value 1
If you have used Get original above, this maximum value is ignored
26
-------------------
BE 2
BE1
Parameter 2
.
.
.
profiles.ini
This file controls the appearance of the operator display page 'Profiles'. It can consist of several subpages showing selections of profile results.
After the file version, you define the number of subpages called number of groups. For each group the background color, the number of result channels (displayed from left to right) and the number of samples (displayed from top to bottom) has to be specified. In the example below there are 3 groups, showing color results for the last 6 panes for transmittance and reflection from both sides. The range of the traverse motion is specified by the settings for Position x min and Position x max. Like described in the last section (results_history.ini) it is recommended to use the term Get original below the line Target value 1. This means that the settings for the target value and the tolerance range for this parameter are taken from the original definition in the deposition device part. The direction parameter set to 1 in the example below means that the scan is across the pane, perpendicular to the motion of the substrates.
Version
1
Number of groups
3
Name group 1
Profiles T
Background color group 1 R
200
Background color group 1 G
200
Background color group 1 B
255
Number of channels group 1
3
Number of samples group 1
6
-------------------
BE 1
BE9
Parameter 1
BE9 T L*
Target value 1
Get original
Min warning value 1
80
Max warning value 1
100
Position minimum 1
500
Position maximum 1
2500
Direction 1
1
-------------------
BE 2
BE9
Parameter 2
BE9 T a*
Target value 2
Get original
Min warning value 2
80
Max warning value 2
100
Position minimum 2
500
Position maximum 2
2500
Direction 2
1
-------------------
BE 3
BE9
Parameter 3
BE9 T b*
Target value 3
Get original
Min warning value 3
80
Max warning value 3
100
Position minimum 3
500
Position maximum 3
2500
Direction 3
1
Name group 2
Profiles RF
Background color group 2 R
255
Background color group 2 G
255
Background color group 2 B
50
Number of channels group 2
3
Number of samples group 2
6
-------------------
BE 1
BE9
Parameter 1
BE9 RF L*
Target value 1
Get original
Min warning value 1
80
Max warning value 1
100
Position minimum 1
500
Position maximum 1
2500
Direction 1
1
-------------------
BE 2
BE9
Parameter 2
BE9 RF a*
Target value 2
Get original
Min warning value 2
80
Max warning value 2
100
Position minimum 2
500
Position maximum 2
2500
Direction 2
1
-------------------
BE 3
BE9
Parameter 3
BE9 RF b*
Target value 3
Get original
Min warning value 3
80
Max warning value 3
100
Position minimum 3
500
Position maximum 3
2500
Direction 3
1
Name group 3
Profiles RG
Background color group 3 R
50
Background color group 3 G
255
Background color group 3 B
200
Number of channels group 3
3
Number of samples group 3
6
-------------------
BE 1
BE9
Parameter 1
BE9 RG L*
Target value 1
Get original
Min warning value 1
80
Max warning value 1
100
Position minimum 1
500
Position maximum 1
2500
Direction 1
1
-------------------
BE 2
BE9
Parameter 2
BE9 RG a*
Target value 2
Get original
Min warning value 2
80
Max warning value 2
100
Position minimum 2
500
Position maximum 2
2500
Direction 2
1
-------------------
BE 3
BE9
Parameter 3
BE9 RG b*
Target value 3
Get original
Min warning value 3
80
Max warning value 3
100
Position minimum 3
500
Position maximum 3
2500
Direction 3
1
spectra.ini
This file controls the appearance of the operator display page 'Spectra'. You define the number of groups (i.e. subpages of this display) and for each group its background color. Each spectrum is defined by 2 items, the Bright Eye name and the spectrum name.
Version
1
Number of groups
2
Name group 1
Inline spectra
Background color group 1 R
200
Background color group 1 G
200
Background color group 1 B
255
Number of spectra group 1
8
-------------------
BE 1
BE1
Spectrum name 1
T
-------------------
BE 2
BE2
Spectrum name 2
T
-------------------
BE 3
BE3
Spectrum name 3
T
-------------------
BE 4
BE4
Spectrum name 4
T
-------------------
BE 5
BE5
Spectrum name 5
T
-------------------
BE 6
BE6
Spectrum name 6
T
-------------------
BE 7
BE7
Spectrum name 7
T
-------------------
BE 8
BE8
Spectrum name 8
T
-------------------
Name group 2
Exsitu spectra
Background color group 2 R
255
Background color group 2 G
255
Background color group 2 B
0
Number of spectra group 2
3
-------------------
BE 1
BE9
Spectrum name 1
T
-------------------
BE 2
BE9
Spectrum name 2
RF
-------------------
BE 3
BE9
Spectrum name 3
RG
-------------------